In order to ensure that the user achieves a good application effect by using the artificial graphite electrode, in addition to carefully determining whether the quality of the artificial graphite electrode is qualified at the time of purchase, it is also necessary to grasp the correct method when using it.

In fact, when using an artificial graphite electrode, it is necessary to remove the foam protective cap on the spare artificial graphite electrode hole and check whether the internal thread of the electrode hole is intact. Clean the surface of the spare graphite electrode and the internal thread of the hole with compressed air containing no oil and water. Carefully screw the joint into the electrode hole at one end of the spare artificial graphite electrode. Do not hit the thread and screw the electrode spreader into the other end of the spare electrode. Inside the electrode hole.

This is the method of using artificial graphite electrodes. Although the method is simple and easy to learn, there is no sloppy sloppy in the whole process. Otherwise, artificial graphite electrodes will not be properly installed, and artificial graphite electrodes may be damaged, causing irreparable damage.